Remaining badges 0
You have earned
0
Get Inspired
0
Try & decide
0
Make it happen
0
To check detailed results, Click here

How To Apply

Pre-painting Steps

Plaster

New masonry surfaces must be allowed to cure completely. It is recommended to allow 28 days as the curing time for new masonry surfaces.

Cleaning

Surface should be free from any loose paint, dust or grease. Growths of fungus, algae or moss should be removed by wire brushing and water. In case of areas having excessive dampness use Asian Paints DampBlock to limit further dampness. When the underlying surface exhibits chalkiness, in spite of thorough surface cleaning, use Asian Paints Exterior Sealer.

Filling For Cracks

For filling cracks upto 3mm use Asian Paints Crack Seal.

Filling For Holes & Dents

In case of dents and holes use Asian Paints Wall Putty or white cement and fine sand in the ratio 1:3

Apex Tile Guard should not be applied on surfaces / substrates that are subjected to continuous seepage or dampness.

PAINT APPLICATION PROCESS
APPLICATION PRODUCT
CODE
THINNER DILUTION %
(BY VOLUM)
APPLICATION
VISCOSITY (SEC)
RECOATING
PERIOD (HOURS)
STEP 1
FIRST COAT
ASIAN PAINTS
APEX TILE GUARD

(BRUSH / SPRAY)
1007 WATER 30% PASTE FORM 4-6 HRS
STEP 2
SECOND COAT
ASIAN PAINTS
APEX TILE GUARD

(BRUSH / SPRAY)
1007 WATER 30% PASTE FORM 4-6 HRS
1. As measured through a Ford cup.
2. Recoat period is quoted for 25°C and 50% Relative Humidity, these may vary under different conditions.
3. For best results, it is advisable to apply Apex Tile Guard on both sides of a roof tile individually before laying.
Ancillaries
  • Asian Paints Exterior Wall putty is a specially designed product based on white cement, redispersible polymer & functional additives for application on exterior rough plasters to give a smooth finish.

    Exterior Wall Putty

  • Asian Paints Exterior Primer is water-based wall coating suitable for application on exteriors as an undercoat to exterior emulsions.It has a good opacity & whiteness, which helps improve the appearance of the emulsion top coat.Exterior Wall Primers doesnot chalk & can be applied on freshly plastered surfaces that are adequately cured.It doesnot require any water curing.

    Exterior Wall Primer

  • Asian Paints Exterior Sealer is an acrylic copolymer-based surface conditioner for exterior surfaces.It is designed to penetrate into the exterior substrate & also improves adhesion of the Exterior Emulsion Paint topcoats.

    Exterior Sealer

  • Asian Paints Utsav Primer (Water Thinnable)is a water based wall primer that can be usedv in interior masonary surfaces.It has good whiteness, good coverage & flow & leveling properties.

    Utsav Primer (WT)

  • Asian Paints Utsav Primer (E3) is a Solvent-Based primer that can be used on cement as well as wooden surfaces.It is an under coat that provides good adhesion to the surface, thereby increasing the life of the entire paint system.It hasw good sealing properties,which leads to lower absorption, ensuring a uniform deposition of top coats.it is a quality product available at economical price.

    Utsav Primer (ST)

My Colour Project

My Colour Project

Involve yourself in your home painting experience, at every step!

Let us make painting an joyful journey instead of a chore.

  • Browse and post home décor ideas
  • Visualise the end result with our helpful tools or consult our experts
  • Finally, seal the deal using our tips and planners and proudly exhibit the fantastic results

Moreover you can save each step as you go along to track your progress or make changes later.

Close
Close
Close