apex duracast finetex

Known for its distinctive textured pattern, Apex Duracast FineTex is a modified acrylic, water-based exterior product specially designed as an intermediary coating. It is excellent for the adhesion of subsequent coats.
Image
cane weave

cane weave

The true woven look for all types of interior and exterior surfaces.

view all
honey comb

honey comb

Replicate the geometric perfection of a honeycomb by using this effect.

view all
ripples

ripples

Use this finish to see the dynamic nature of fluid play its magic on your walls.

view all
spring time

spring time

The fresh look of the most loved season, now for your walls

view all
tropical

tropical

Get the evergreen design style with this contemporary finish.

view all

benefits

hides fine cracks

hides fine cracks

Hides surface undulations and fine cracks.

good adhesion

good adhesion

Resists efflorescence and lime blooming with good adhesion on all cement plasters and promotes adhesion of subsequent coats.

plaster protection

plaster protection

Serves as an undercoat which provides protection and decor for a variety of exterior and interior surfaces.

tough textured

tough textured

Tough textured finish that lasts for a long time and ensures low maintenance.

available packs

Shelf life: 3 years from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat.

coverage

available shades

Choose from over 1800 original shades in our Colour Catalogue.

explore

how to paint

image

how to paint exterior wall surfaces of your home

pre-painting steps

plaster

New masonry surfaces must be allowed to cure completely. Allow 28 days as the curing time for new masonry surfaces.

 

cleaning

Surface should be free from any loose paint, dust or grease. Growth of fungus, algae or moss should be removed by wire brushing and water. In case of areas having excessive dampness, please use Asian Paints DampBlock to limit further dampness. When the underlying surface exhibits chalkiness, in spite of thorough surface cleaning, use Asian Paints SmartCare Exterior Sealer.

 

filling for cracks

For filling cracks up to 3mm use Asian Paints SmartCare Crack Seal.

 

filling for holes & dents

In case of dents and holes, use Asian Paints Wall Putty or a mix of white cement and fine sand in the ratio of 1:3.

Apex Duracast FineTex should not be applied on surfaces / substrates that are subjected to continuous seepage or dampness.

ancillary products

faqs

how much area does the product cover?

Apex Duracast Finetex covers an area of 10 - 12 square feet per litre for 1 coat.

can we use a thinner to dilute the paint?

If required, you can dilute the paint with water (50 to 100 ml.). However, Asian Paints does not recommend using a thinner in the paint.

what is the application procedure for this paint?

Before painting you need to first, clean the surface properly to remove dirt, chalk, dust and particles of previous paint. This can be done by scraping your walls with a wire brush and cleaning with water. We recommend that you allow freshly plastered surfaces to cure properly with water for at least 4 weeks before painting. With regards to the painting procedure, below are the steps to be followed:

1) Apply Asian Paints Wall Putty (optional). Mix water in the Putty based on your requirement to form a paste. Allow the surface to dry for 4 hours.

2) Apply Exterior Wall Primer by mixing 900 - 1100 ml. of water. If using a spray, you need to mix 400 - 450 ml. of water. Allow surface to dry for 4 hours. (Application of primer is mandatory in case of re-painting. Horizontal surfaces like top of windows or ledges should be painted with 3 coats of Apex Ultima for greater protection).

3) Apply the first coat of Asian Paints Duracast Finetex (Mix water, if required, up to 50 - 100 ml.) with a roller. After application, allow the surface to dry for 12 - 16 hours.

4) Lastly, apply 2 - 3 coats of Asian Paints Apex Ultima/Apex/Apex Ultima Metallic. You can apply this with a brush, spray or roller by mixing 400 ml of water. Allow the surface to dry for 4 - 6 hours.

how long will apex duracast finetex last?

Apex Duracast Finetex will last for 7 years.

what are the benefits of applying apex duracast finetex?

Painters will find the application easier as compared to other textures. Moreover, it hides fine cracks on the wall.

which kind of tool can be used to apply this texture?

You need to use a roller while applying the Asian Paints Apex Duracast Finetex.

how much area does the product cover?

Apex Duracast Finetex covers an area of 10 - 12 square feet per litre for 1 coat.

can we use a thinner to dilute the paint?

If required, you can dilute the paint with water (50 to 100 ml.). However, Asian Paints does not recommend using a thinner in the paint.

what is the application procedure for this paint?

Before painting you need to first, clean the surface properly to remove dirt, chalk, dust and particles of previous paint. This can be done by scraping your walls with a wire brush and cleaning with water. We recommend that you allow freshly plastered surfaces to cure properly with water for at least 4 weeks before painting. With regards to the painting procedure, below are the steps to be followed:

1) Apply Asian Paints Wall Putty (optional). Mix water in the Putty based on your requirement to form a paste. Allow the surface to dry for 4 hours.

2) Apply Exterior Wall Primer by mixing 900 - 1100 ml. of water. If using a spray, you need to mix 400 - 450 ml. of water. Allow surface to dry for 4 hours. (Application of primer is mandatory in case of re-painting. Horizontal surfaces like top of windows or ledges should be painted with 3 coats of Apex Ultima for greater protection).

3) Apply the first coat of Asian Paints Duracast Finetex (Mix water, if required, up to 50 - 100 ml.) with a roller. After application, allow the surface to dry for 12 - 16 hours.

4) Lastly, apply 2 - 3 coats of Asian Paints Apex Ultima/Apex/Apex Ultima Metallic. You can apply this with a brush, spray or roller by mixing 400 ml of water. Allow the surface to dry for 4 - 6 hours.

view all

similar products

Image