interior walls

  • Darker shades may require an additional coat to be concealed completely. The actual shade, especially for darker shades, will be visible only after the film is dry. It cannot be identified either in the can or in the wet state.
  • Felt rolling is to be done only for Royale and Lustre finish. The darker shades are never to be felt rolled since it causes foaming due to the presence of more surfactants in them.
  • Solvent based paints (those using thinner other than water) should be allowed twice the drying time than given here in case of high-humidity climate like monsoons.

Putty can be applied to make the substrate smoother; however it has to be sandwiched between 2 coats of primer.

Here's the recommended dilution and application procedure for interior walls:

 

Sr. No.

Name of Paint

Thinner for 1 ltr/kg of paint in mls

Thinner

No. of coats recommended and application

Undercoat applied

Recoating Time (hrs)

1

Apcolite Premium Gloss Enamel

80 - 100

T - 101 or Mineral Turpentine Oil (MTO)

2 - Brushing

AP Decoprime Wall Primer(ST) or AP Metal primer (for metal surface) or AP Wood Primer (for wooden surface)

8 - 10

2

Apcolite Premium Satin Enamel

150 - 200
350 - 400

T - 101 or MTO

2 - Brushing
2 - Spraying

AP Decoprime Wall Primer(ST) or AP Metal primer (for metal surface) or AP Wood Primer (for wooden surface)

6 - 8

3

AP Interior Wall Finish - Matt

70 - 90

T - 101 or MTO

2 - Brushing top coat rolling

AP Decoprime Wall Primer (ST)

8 - 10

4

Interior Wall Finish - Lustre

70 - 90

T - 101 or MTO

2 - Brushing followed by rolling on every coat

AP Decoprime Wall Primer (ST)

8 - 10

5

Gattu Enamel

80 - 100

MTO

2 - Brushing

AP Decoprime Wall Primer (ST) or AP Metal primer(for metal surface)or AP Wood Primer (forwoodensurface)

6 - 8

6

Luxury Ultra Gloss Enamel

60 - 100

MTO Or T - 101

2 - Brushing

AP Decoprime Wall Primer (ST) or AP Metal primer (for metal surface) or AP Wood Primer (for wooden surface)

8

7

Premium Semi - Gloss Enamel Water Based

150 - 250

Water

2 - Brushing
2 - Spraying

AP Decoprime Wall Primer (ST) or AP Metal primer (for metal surface) or AP Wood Primer (for wooden surface)

4 - 6

8

AP Royale Luxury Emulsion

400 - 450

Water

3 - for light shades and 4 - for dark shades. Brushing followed by rolling on every coat for scrap down / new job. Refinish jobs will have 1 coat lesser.

AP Decoprime Wall Primer (ST)

4

9

Premium Emulsion White Shades

600 - 700
500 - 600

Water

2 - for light shades. 3 – for dark shades Brushing followed by rolling of top coat.

AP Decoprime Wall Primer (ST) or AP Decoprime. Wall Primer (WT)

3 - 4

10

Tractor Emulsion

500 - 750

Water

2 - for light shades. 3 - for dark shades Brushing followed by rolling of top coat.

AP Decoprime Wall Primer (ST) or AP Decoprime Wall Primer (WT)

4

11

Tractor Acrylic Distemper

550 - 600 wt.

Water

2 - for light shades. 3 - for dark shades. Brushing followed by rolling of top coat.

AP Decoprime Wall Primer (ST) or AP Decoprime. Wall Primer (WT)

3 - 4

12

Tractor Synthetic Distemper

500 - 600 by wt.

Water

2 - for light shades. 3 - for dark shades. Brushing

AP Decoprime Wall Primer (ST) or AP Decoprime. Wall Primer (WT)

6

Need help? Chat with us
Image