Apex Ultima Protek System is a high-performance painting system that offers a 12-year paint performance (colour retention & film integrity) warranty and a unique 10-year waterproofing and 10-year anti-algal warranty. The first of its kind, the warranty covers product performance against not just fading, flaking and peeling but also covers blisters, splits, tears and excessive weathering of the paint film and prevents external water ingress through vertical walls. The same is applicable only if the recommended procedures are followed as detailed in the Product Information Sheet and the Warranty booklet. The warranty is a mark of reassurance from Asian Paints on the purchase of the product. Please call on our toll-free number 1800-209-5678 or visit our website to register your warranty.

Apex Ultima Protek consists of a top coat and base coat. The Base Coat has to be applied as an undercoat and cannot be tinted. Apex Ultima Protek top coat, applied over Apex Ultima Protek base coat can be tinted to achieve the desired shade. Usage of base coat provides you with waterproofing warranty. Application of Protek top coat can also be done over Exterior Primer but in that case only paint performance warranty will be provided.

The basic requirements to get a warranty include a purchase of atleast 40 litres of Ultima Protek topcoat and the respective basecoat/undercoat being used.

Yes, the different warranty parameters will be covered in a single warranty document and it will take 15 days for the certificate to arrive.

The Apex Ultima Protek warranty registration process is very simple. A call has to be made on our Asian Paints Helpline 1800-209-5678 to register the warranty, or you can visit our website and fill in the required details. All information will be logged and then a warranty registration number will be provided for future reference.

All Asian Paints products contain no added Lead, Mercury, Arsenic or Chromium.

In the case of Base Coat, 1 self-priming coat of Protek and 1 protective undiluted coat of Protek will cover 40 square feet per litre for 2 coats. However, for Top Coat, it will cover 55 to 65 square feet per litre for 2 coats.

The warranty will be provided where SmartCare Damp Proof, SmartCare Damp Proof Advanced, SmartCare Damp Proof Xtreme or SmartCare Damp Sheath Exterior has been used on horizontal surfaces.

The life span of Apex Ultima Protek is 12 years.

To apply Apex Ultima Protek, clean the surface thoroughly with a water jet and wire brush to remove loose particles and algal growth. If any minor surface cracks, fix it with the Asian Paints SmartCare Crack Seal. After this, Base Coat Application has to be done. Apply the first coat of Apex Ultima Protek base coat. Mix 1 litre Apex Ultima Protek base coat with 300 ml. of water. Then apply a second coat of Apex Ultima Protek base coat. This coat is to be applied undiluted. Ensure coverage of 40 square feet per litre for 2 coats. Lastly, apply Top Coat on the surface with the desired shade of Ultima Protek. Mix 1 litre of Apex Ultima Protek Top coat with 400 ml of water and apply 2 coats of Apex Ultima Protek Top Coat over the Base Coat. For Top Coat, ensure coverage of 55-65 square feet per litre for 2 coats. Allow a drying time of 4 hours between coats.

No, the application of Asian Paints Wall Putty is not recommended as the hold of Apex Ultima Protek base coat is much better on the surface as compared to Putty. If there is a failure in the putty application, the warranty will not remain valid. However, if Asian Paints Wall putty is to be applied to level the surface, a thin coat (less than 1.5 mm) can be applied.

We cannot use Apex Ultima Protek on horizontal surfaces as this product is specially developed for vertical walls. Asian Paints SmartCare Damp Proof can be applied on horizontal surfaces.

No, this product can’t take care of structural cracks. This paint, with its unique crack bridging ability, can ensure that cracks do not appear at the surface of up to 2 mm.

This paint cannot be used for interiors because it consists of UV Surface Cross- Linking Technology and in the absence of UV Radiation, the paint will not provide the desired finish.

Yes, Apex Ultima Protek can be used on rough cement plaster.

The Base Coat can be left exposed for a maximum period of 7 - 10 days before the application of the Top Coat.

SmartCare Bio Block is to be used as a separate coat wherever required. It cannot be mixed or diluted.