It can be applied on masonry wall surfaces.

Apcolite Premium Satin Emulsion gives you a coverage of 180 - 220 square feet per litre for 1 coat and 95-115 square feet per litre for two coats.

In one litre of Asian Paints Apcolite Premium Satin Emulsion, you need to dilute 150ml - 250ml of water.

It can be applied with a brush, roller or spray.

If you have not opened the lid of the tin, Apcolite Premium Satin Emulsion will last for the next 3 years. However, if the lid has been opened, we recommend using it within 24 hours.

Apcolite Premium Satin Emulsion is available in 1500+ shades. You can use the following Colour Tools:

1) Colour Spectra Fan Deck

2) Apcolite Emulsion Shade car

Fresh Surfaces : Primer + Putty + Primer + 2 Coats of Apcolite Premium Satin Emulsion

Use Emery paper 180 to remove loose particles                            

Apply Asian Paints Decoprime ST @ 8-10% dilution with turpentine

After 6-8 hrs of drying, apply Asian Paints Acrylic Wall Putty (for masonry ,cement surfaces, wood ). Sanding with Emery Paper 180 and wipe clean.

Again apply Asian Paints Primer @ 8-10% dilution with turpentine after 4-6 hrs of putty application .  Sanding with Emery Paper 320 and wipe clean

Then apply 2 coats of Apcolite Premium Satin Emulsion @ 15-25% dilution with water. 4-6 hrs between 2 coats . 

No, it is not recommended to use Apcolite Premium Satin Emulsion on exterior surfaces.

The glossometer reading is 50-60 at 60 degree.