Choose a colour and see how it looks on a wall.
Didn’t find the right shade for your home? We have more than 2200+ colours for you to choose from.
Includes two coats each primer, putty and fresh paint.
Here's your budget estimate:
Ensure a perfect finish with these additional products.
Find decor inspiration and popular colour schemes in our ideas gallery.
Make your interior walls the centrepiece of your home. Transform any wall from flat to fantastic with one-of-a-kind designer wall textures by Asian Paints.
Want to protect wooden substrates and enhance its finish? Our exclusive range of wood finishes make any wooden surface look rich and elegant.
Apcolite Premium Satin Emulsion is a water-based Emulsion.
It can be applied on masonry wall surfaces.
Apcolite Premium Satin Emulsion gives you a coverage of 180 - 220 square feet per litre for 1 coat and 95-115 square feet per litre for two coats.
In one litre of Asian Paints Apcolite Premium Satin Emulsion, you need to dilute 150ml - 250ml of water.
It can be applied with a brush, roller or spray.
If you have not opened the lid of the tin, Apcolite Premium Satin Emulsion will last for the next 3 years. However, if the lid has been opened, we recommend using it within 24 hours.
Apcolite Premium Satin Emulsion is available in 1500+ shades. You can use the following Colour Tools:
1) Colour Spectra Fan Deck
2) Apcolite Emulsion Shade Card
Fresh Surfaces : Primer + Putty + Primer + 2 Coats of Apcolite Premium Satin Emulsion
Use Emery paper 180 to remove loose particles
Apply Asian Paints Decoprime ST @ 8-10% dilution with turpentine
After 6-8 hrs of drying, apply Asian Paints Acrylic Wall Putty (for masonry ,cement surfaces, wood ). Sanding with Emery Paper 180 and wipe clean.
Again apply Asian Paints Primer @ 8-10% dilution with turpentine after 4-6 hrs of putty application. Sanding with Emery Paper 320 and wipe clean
Then apply 2 coats of Apcolite Premium Satin Emulsion @ 15-25% dilution with water. 4-6 hrs between 2 coats.
No, it is not recommended to use Apcolite Premium Satin Emulsion on exterior surfaces.
The glossometer reading is 50-60 at 60 degree.