Find A Store Find A Store
Find Asian Paints Store
TERRACE & TANKS
BATHROOMS
INTERIORS
TILING
CRACKS & JOINTS
- Gaps & Joints
- Leakages through gaps and joints
- Cracks on painted surfaces
- Cracks on 3m interior/exterior walls
- Cracks on 10m interior/exterior walls
- Cracks on rough surfaces
- Structural Cracks
- Expansion joints
Gaps & Joints
Gaps/Joints Between Surfaces
Cause of the problem
Gaps/ joints are one of the most common un-noticed sources which cause waterproofing problems by allowing entry of water into the structure. Neutral silicone sealants like Unyversyl can be used for filling these gaps and joints.
Recommended products:
SmartCare Unyverseal
SmartCare UnyverSeal is a durable and odorless neutral silicone sealant for sealing of glass, masonry and sanitary joints. It provides waterproofing warranty for 2 years.
Leakages through gaps and joints
LeakageThrough Gaps & Joints which Requires Painting Over
Cause of the problem
Filled up gaps and joints are starkly visible if colour is not matched to the substrate. Since sealants come in limted colours, matching is an issue. Paintable sealants like Akrylmax help in overcoming this problem.
Recommended products:
SmartCare AkrylMax
SmartCare AkrylMax is an acrylic emulsion based plastic elastic sealant for sealing masonry joints that can be top coated with water-based paint.
Cracks on painted surfaces
Spider Web like Cracks on Painted Surface
Cause of the problem
Cracks appear on interior walls due to shrinkage, wrong cement:sand ratio during repair works or vibrations arising due to temperature variations. Crackshield arrests these cracks from spreading and surfacing over paint film.
Recommended products:
SmartCare Crackshield
Crackshield is the only preventive crack solution available in India. It is a sheet of glass fiber which is applied between primer coatings to prevent spider web like hairline cracks from appearing on interior painted walls.
Cracks on 3m interior/exterior walls
Plaster Cracks up to 3mm in Interior/Exterior Walls
Cause of the problem
Cracks appear on walls due to shrinkage or vibrations arising due to temperature variations. Crackseal helps in repairing such cracks.
Recommended products:
SmartCare Crack Seal
Crack Seal is a paste like material used to fill cracks up to 3 mm wide on interior or exterior walls. It is a flexible product and absorbs movements in the crack. Crack Seal is a paintable product.
Cracks on 10m interior/exterior walls
Plaster Cracks up to 10mm on Exterior Walls
Cause of the problem
Exterior cracks are usually subject to severe weathering over period of time and suffer more thermal movements. Sometimes they are wider than interior cracks and require a more flexible solution.
Recommended products:
SmartCare Textured Crack Filler
Texture Crack Filler is a one of its kind, flexible crack solution for exterior cracks up to 10 mm wide. This product has a texture which matches the natural roughness of exterior walls making repair marks negligible.
Cracks on rough surfaces
Plaster Cracks on Textured or Rough Surfaces
Cause of the problem
Exterior cracks are usually subject to severe weathering over period of time and suffer more thermal movements. As such, sometimes they are wider than interior cracks and require a more flexible solution.
Recommended products:
SmartCare Textured Crack Filler
Texture Crack Filler is a one of its kind, flexible crack solution for exterior cracks up to 10 mm wide. This product has a texture which matches the natural roughness of exterior walls making repair marks negligible.
Structural Cracks
Structural Cracks on Walls or Load Bearing Areas
Cause of the problem
Structural cracks typically appear due to weakening of the load bearing parts in the structure through ingress of water. They may also occur due to incorrect design, faulty construction or overloading. Since it may affect the safety of the building over long term, it is critical to treat them.
Recommended products:
SmartCare Hybrid PU Sealant
SmartCare Hybrid PU Sealant is a single component polyurethane sealant for sealing of dynamic joints and cracks in interiors as well as exteriors. After curing, it forms a flexible rubber-type seal that is paintable.
Expansion joints
Expansion Joints
Cause of the problem
Structural cracks typically appear due to weakening of the load bearing parts in the structure through ingress of water. They may also occur due to incorrect design, faulty construction or overloading. Since it may affect the safety of the building over long term, it is critical to treat them.
Recommended products:
SmartCare Hybrid PU Sealant
SmartCare Hybrid PU Sealant is a single component polyurethane sealant for sealing of dynamic joints and cracks in interiors as well as exteriors. After curing, it forms a flexible rubber-type seal that is paintable.
ASIAN PAINTS SAFE PAINTING SERVICE
