Brush away your boredom and use this effect to bring a drizzling effect for your surfaces.
View AllHides surface undulations and fine cracks.
Tough textured finish that lasts for a long time and ensures low maintenance.
Increases the life of plaster by protecting it from wind driven rain.
Excellent UV resistance and adhesion.
Resists fungal and algal growth when applied as system, with the recommended top coat.
Shelf life: 3 years from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat.
New masonry surfaces must be allowed to cure completely. Allow 28 days as the curing time for new masonry surfaces.
Surface should be free from any loose paint, dust or grease. Growth of fungus, algae or moss should be removed by wire brushing and water. In case of areas having excessive dampness, please use Asian Paints DampBlock to limit further dampness. When the underlying surface exhibits chalkiness, in spite of thorough surface cleaning, use Asian Paints SmartCare Exterior Sealer.
For filling cracks up to 3mm use Asian Paints SmartCare Crack Seal.
In case of dents and holes, use Asian Paints Wall Putty or a mix of white cement and fine sand in the ratio of 1:3.
Apex Duracast DholpurTex should not be applied on surfaces / substrates that are subjected to continuous seepage or dampness.
Apex Duracast Dholpurtex covers 2 - 2.5 square feet per litre for 2 coats.
We do not recommend using a thinner since no dilution is required in the paint.
Before painting you need to first, clean the surface properly to remove dirt, chalk, dust and particles of previous paint. This can be done by scraping your walls with a wire brush and cleaning with water. We recommend that you allow freshly plastered surfaces to cure properly with water for at least 4 weeks before painting. With regards to the painting procedure, below are the steps to be followed:
1) Apply Asian Paints Wall Putty (optional). Mix water in the Putty based on your requirement to form a paste. Allow the surface to dry for 4 hours.
2) Apply Exterior Wall Primer by mixing 900 - 1100 ml. of water. If using a spray, you need to mix 400 - 450 ml. of water. Allow surface to dry for 4 hours. (Application of primer is mandatory in case of re-painting. Horizontal surfaces like top of windows or ledges should be painted with 3 coats of Apex Ultima for greater protection).
3) Apply the first coat of Asian Paints Duracast Dholpurtex (No dilution required) with a Trowel / Spatula. After application, allow the surface to dry for 12 - 16 hours.
4) Lastly, apply 2 - 3 coats of Asian Paints Apex Ultima/Apex/Apex Ultima Metallic. You can apply this with a brush, spray or roller by mixing 400 ml of water. Allow the surface to dry for 4 - 6 hours.
This product will last for 7 years.
Painters will find the application easier as compared to other textures. Moreover, it hides fine cracks on the wall.
You need to use a Trowel/Spatula while applying the Asian Paints Apex Duracast Dholpurtex.
Apex Duracast Dholpurtex covers 2 - 2.5 square feet per litre for 2 coats.
We do not recommend using a thinner since no dilution is required in the paint.
Before painting you need to first, clean the surface properly to remove dirt, chalk, dust and particles of previous paint. This can be done by scraping your walls with a wire brush and cleaning with water. We recommend that you allow freshly plastered surfaces to cure properly with water for at least 4 weeks before painting. With regards to the painting procedure, below are the steps to be followed:
1) Apply Asian Paints Wall Putty (optional). Mix water in the Putty based on your requirement to form a paste. Allow the surface to dry for 4 hours.
2) Apply Exterior Wall Primer by mixing 900 - 1100 ml. of water. If using a spray, you need to mix 400 - 450 ml. of water. Allow surface to dry for 4 hours. (Application of primer is mandatory in case of re-painting. Horizontal surfaces like top of windows or ledges should be painted with 3 coats of Apex Ultima for greater protection).
3) Apply the first coat of Asian Paints Duracast Dholpurtex (No dilution required) with a Trowel / Spatula. After application, allow the surface to dry for 12 - 16 hours.
4) Lastly, apply 2 - 3 coats of Asian Paints Apex Ultima/Apex/Apex Ultima Metallic. You can apply this with a brush, spray or roller by mixing 400 ml of water. Allow the surface to dry for 4 - 6 hours.
The shades displayed on this site are indicative and are not precise representations of actual paint colours due to variance in monitor calibrations and resolution as well as screen settings. While scientific tools have been used to match colours and make them look like the paint you will use, yet, there is likely to be a difference.
You may bring any of the colour shade code to your local Colour World Dealer to match and / or order the exact colour that you are looking for.
We offer 200 ml samplers of our products at select Colour World outlets, which can be tinted to any colour of your choice. Not all shades are available in all products. Please visit the nearest Colour World Dealer for shade details.