apex duracast pebbletex

Known for its bubble or headcut pattern Apex Duracast PebbleTex is an acrylic, water-based exterior product. It can be sprayed on both exterior and interior wall surfaces.
Image
bubble

bubble

Use this effect of globules to give a premium look to your walls.

view all
headcut

headcut

If the pressed look finish is what you are looking for, look no further.

view all

benefits

hides fine cracks

hides fine cracks

Hides surface undulations and fine cracks.

tough textured

tough textured

Tough textured finish that lasts for a long time and ensures low maintenance.

anti-algal formula

anti-algal formula

Resists fungal and algal growth when applied as system, with the recommended top coat.

unique patterns

unique patterns

Can be used to obtain a ‘bubble’ or headcut pattern.

available packs

Shelf life: 3 years from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat.

coverage

available shades

Choose from over 1800 original shades in our Colour Catalogue.

explore

how to paint

image

how to paint exterior wall surfaces of your home

pre-painting steps

plaster

New masonry surfaces must be allowed to cure completely. Allow 28 days as the curing time for new masonry surfaces.

 

cleaning

Surface should be free from any loose paint, dust or grease. Growth of fungus, algae or moss should be removed by wire brushing and water. In case of areas having excessive dampness, please use Asian Paints DampBlock to limit further dampness. When the underlying surface exhibits chalkiness, in spite of thorough surface cleaning, use Asian Paints SmartCare Exterior Sealer.

 

filling for cracks

For filling cracks up to 3mm use Asian Paints SmartCare Crack Seal.

 

filling for holes & dents

In case of dents and holes, use Asian Paints Wall Putty or a mix of white cement and fine sand in the ratio of 1:3.

Apex Duracast PebbleTex should not be applied on surfaces / substrates that are subjected to continuous seepage or dampness.

ancillary products

faqs

how much area does the product cover?

Apex Duracast Pebbletex covers 7 - 9 square feet per kg. up to 1 coat.

can we use a thinner to dilute the paint?

No, dilution is required but we don’t recommend using thinner in the paint.

what is the application procedure for this paint?

Before painting you need to first, clean the surface properly to remove dirt, chalk, dust and particles of the previous paint. This can be done by scraping your walls with a wire brush and cleaning with water. We recommend that you allow freshly plastered surfaces to cure properly with water for at least 4 weeks before painting. In case of dents and holes, use Asian Paints Wall Putty or white cement and fine sand in the ratio 1:3. Apex Duracast Pebbletex should not be applied on surfaces that are prone to continuous seepage or dampness. With regards to the painting procedure, below are the steps to be followed:

1) Apply Asian Paints Wall Putty (optional). Mix water in the Putty based on your requirement to form a paste. Allow the surface to dry for 4 hours. 

2) Apply Exterior Wall Primer by mixing 900 - 1100 ml. of water. If using a spray, you need to mix 400 - 450 ml. of water. Allow surface to dry for 4 hours. (Application of primer is mandatory in case of re-painting. Horizontal surfaces like top of windows or ledges should be painted with 3 coats of Apex Ultima for greater protection). 

3) Apply the first coat of Asian Paints Duracast Pebbletex (1.5% water to be mixed if required). Apply it with Air Assisted Spray. After application, allow the surface to dry for 12 - 16 hours. 

4) Lastly, apply 2 - 3 coats of Asian Paints Apex Ultima/Apex/Apex Weather proof Emulsion. You can apply this with a brush, spray or roller by mixing 400 ml of water to the Emulsion. Allow the surface to dry for 4 to 6 hours.

how long will this product last?

The life span of this product is 7 years.

what are the benefits of applying this product?

Painters will find the application of this product easier as compared to other textures. Moreover, it hides fine cracks on the wall. This texture can also be applied on both interior and exterior walls.

which painting tool can be used for this texture?

For the Asian Paints Apex Duracast Pebbletex, you need to use Air Assisted Spray while application.

how much area does the product cover?

Apex Duracast Pebbletex covers 7 - 9 square feet per kg. up to 1 coat.

can we use a thinner to dilute the paint?

No, dilution is required but we don’t recommend using thinner in the paint.

what is the application procedure for this paint?

Before painting you need to first, clean the surface properly to remove dirt, chalk, dust and particles of the previous paint. This can be done by scraping your walls with a wire brush and cleaning with water. We recommend that you allow freshly plastered surfaces to cure properly with water for at least 4 weeks before painting. In case of dents and holes, use Asian Paints Wall Putty or white cement and fine sand in the ratio 1:3. Apex Duracast Pebbletex should not be applied on surfaces that are prone to continuous seepage or dampness. With regards to the painting procedure, below are the steps to be followed:

1) Apply Asian Paints Wall Putty (optional). Mix water in the Putty based on your requirement to form a paste. Allow the surface to dry for 4 hours. 

2) Apply Exterior Wall Primer by mixing 900 - 1100 ml. of water. If using a spray, you need to mix 400 - 450 ml. of water. Allow surface to dry for 4 hours. (Application of primer is mandatory in case of re-painting. Horizontal surfaces like top of windows or ledges should be painted with 3 coats of Apex Ultima for greater protection). 

3) Apply the first coat of Asian Paints Duracast Pebbletex (1.5% water to be mixed if required). Apply it with Air Assisted Spray. After application, allow the surface to dry for 12 - 16 hours. 

4) Lastly, apply 2 - 3 coats of Asian Paints Apex Ultima/Apex/Apex Weather proof Emulsion. You can apply this with a brush, spray or roller by mixing 400 ml of water to the Emulsion. Allow the surface to dry for 4 to 6 hours.

view all

similar products

Image