Here's why Ultima Protek is perfect for your home.
Lamination is strongly associated with protection and the ad traverses through a town that takes this lamination to a new level.
Choose a colour and see how it looks on a wall.
Didn’t find the right shade for your home? We have more than 2200+ colours for you to choose from.
Includes two coats each primer, putty and fresh paint.
Here's your budget estimate:
Ensure a perfect finish with these additional products.
Transform ordinary exteriors of your home into amazing work of art. Browse through our handpicked collection of exterior textures.
Increase the life of all painted surfaces in your home by protecting them from leakage, seepage etc. using SmartCare range of products.
Apex Ultima Protek System is a high performance painting system that offers a 10 year durability (colour retention & ﬁlm integrity) warranty and a unique 6 year waterprooﬁng and 5 year anti-algal warranty. The ﬁrst of its kind, the warranty covers product performance against not just fading, ﬂaking and peeling but also covers blisters, splits, tears and excessive weathering of the paint ﬁlm and prevents external water ingress through vertical walls. The same is applicable only if the recommended procedures are followed as detailed in the Product Information Sheet and the Warranty booklet. The warranty is a mark of reassurance from Asian Paints on the purchase of the product. Please call on our toll free number 1800-209-5678 to register your warranty.
Apex Ultima Protek consists of a Top Coat and Base Coat. The Base Coat has to be applied as an undercoat and cannot be tinted. Apex Ultima Protek Top Coat, applied over Apex Ultima Protek Base coat can be tinted to achieve the desired shade.
The basic requirements to get a warranty include a purchase of atleast 40 litres of Ultima Protek Base Coat and 20 litres of Ultima Protek Top Coat.
Yes, both the warranties will be covered in a single warranty document and it will take 15 days for the certificate to arrive.
The Ultima Protek warranty registration process is very simple. A call has to be made on our Asian Paints Helpline 1800-209-5678 to register the warranty. All information will be logged and then a warranty registration number will be provided for future reference.
In the case of Base Coat, 1 self-priming coat of Protek will cover 6 square metre per litre and 1 protective undiluted coat of Protek will cover 5 to 5.5 square metre per litre. However, for Top Coat, it will cover 5.5 to 6.5 square metre per litre for 2 coats. For every 1 litre of Apex Ultima Protek Topcoat, you need to apply approximately 2 litres of Base coat.
The warranty will only be provided where SmartCare Damp Proof has been used on horizontal surfaces.
The life span of Apex Ultima Protek is 10 years.
To apply Apex Ultima Protek, clean the surface thoroughly with a water jet and wire brush to remove loose particles and algal growth. If any minor surface cracks, fix it with the Asian Paints SmartCare Crack Seal. To level the surface, apply Asian Wall Putty if required. After this, Base Coat Application has to be done. Apply the first coat of Apex Ultima Protek base coat. Mix one litre Apex Ultima Protek (Base coat) with 300 ml. of water. Then apply a second coat of Apex Ultima Protek (Base Coat). This coat is to be applied undiluted. Ensure coverage of 30-35 square feet per litre for 2 coats. Lastly, apply Top Coat on the surface with the desired shade of Ultima Protek. Mix 1 litre of Apex Ultima Protek Top coat with 400 ml. of water and apply 2 coats of Apex Ultima Protek Top coat over the base coat. Allow a drying time of 4 hours between coats.
No, the application of Asian Wall Putty is not recommended as the hold of Apex Ultima Protek base coat is much better on the surface as compared to Putty. Also, if there is a failure in the putty application, the warranty will not remain valid. However, if Asian Wall putty is to be applied to level the surface, a thin coat (less than 1.5 mm) can be applied.
We cannot use Protek on horizontal surfaces as this product is specially developed for vertical walls. Asian Paints SmartCare Damp Proof can be applied on horizontal surfaces.
No, this product can’t take care of structural cracks. This paint, with its unique crack bridging ability, can ensure that cracks do not appear at the surface of up to 2 mm.
This paint cannot be used for interiors because it consists of UV Surface Cross-Linking Technology and in the absence of UV Radiation, the paint will not provide the desired finish.
Yes, Apex Ultima Protek can be used on rough cement plaster.
The Base Coat can be left exposed for 7 - 10 days before the application of the Top Coat.
SmartCare Bio Block is to be used as a separate coat wherever required. It cannot be mixed or diluted.
No, it cannot be mixed with Ultima Protek Base Coat.
Ultima Protex will take 30 minutes for the surface to dry.