Createx Scratch Finish Slate Pattern ETXT7005CMB1002 - Wall Texture Design - Asian Paints

You have {{minicart.cartcount}} items

  • {{item["product"]["name"]}}



Total {{minicart.totalprice}}


Your cart is empty

Createx Scratch Finish Slate Pattern

This texture provides a high-performance coating for roof tiles, Kerala bricks, and non-porous baked clay tiles. It provides high washability, thus helps to keep the tiles look rich and vibrant for a long time.




Swatch Select

₹ 150

Before finalising any shade or pattern order a Swatch (12” X 12 “) of the actual painted surface from us. Each Swatch can be peeled and stuck to your wall and will help you visualize the actual colour under different lighting conditions.

Want to know the budget to get this look on your wall?

Try our Visualiser App

Found the perfect colour for your interiors? Try a sample on your walls to see how it looks before applying.

Visualiser Wall Colour App - Asian Paints

Need help with your painting needs?

Fill the form below to book a free site evaluation by an Asian Paints Ezy Painting Service expert.
Exterior Walls Paint Finishes - Asian Paints

All-weather finishes for exterior walls

In search of the perfect exterior emulsions? Catch the attention of onlookers with our range of exterior paints that are proven to not only look great but also give your house the protection it needs in all weather conditions. 

Product used




How much area does the product cover?

The product covers 0.27-0.37 square metre per kilo gram for 1 coat for White variant. For Crosstex variant, the product covers 0.23-0.27 square metre per kilo gram for 1 coat.

Can we use a thinner to dilute the texture?

We do not recommend using a thinner since no dilution is required in the texture.

What is the film thickness of White variant and Crosstex variant in Scratch finish?

For White variant film thickness is approx. 1.5mm. For Crosstex variant film thickness is approx. 2 mm.

What is the application procedure for this texture?

Before painting you need to first, clean the surface properly to remove dirt, chalk, dust and particles of previous paint. This can be done by scraping your walls with a wire brush and cleaning with water. We recommend that you allow freshly plastered surfaces to cure properly with water for at least 4 weeks before painting. With regards to the painting procedure, below are the steps to be followed:

1) Apply Asian Paints Wall Putty (optional). Mix water in the Putty based on your requirement to form a paste. Allow the surface to dry for 4 hours.

2) Apply Exterior Wall Primer by mixing 900 - 1100 ml. of water. If using a spray, you need to mix 400 - 450 ml. of water. Allow surface to dry for 4 hours. (Application of primer is mandatory in case of re-painting. Horizontal surfaces like top of windows or ledges should be painted with 3 coats of Apex Ultima for greater protection).

3) Apply coat of Apex Createx Scratch Finish (No dilution required). Apply it with a Steel Trowel and create the desired pattern. After application, allow the surface to dry for 12 - 16 hours.

4) Lastly, apply 2 - 3 coats of Asian Paints Apex Ultima/Apex/Apex Ultima Metallic. You can apply this with a brush, spray or roller by mixing 400 ml of water. Allow the surface to dry for 4 - 6 hours.